Letzte Änderung am 2006-10-10 15:11:38 von slam official FAQ link corrected
Erweiterungen:
Note: please check also the Official KANOTIX HowTo for Upgrading Kernel∞!
Löschungen:
Note: please check also the FAQ∞ for upgrading kernel
Editiert am 2006-10-08 16:07:28 von thomashohm
Erweiterungen:
Note: please check also the FAQ∞ for upgrading kernel
Be carefull: since the newer versions of Kanotix, please use the following script for ATI Radeon:
Editiert am 2006-08-08 18:43:21 von Richard
Erweiterungen:
Visit http://debian.tu-bs.de/project/kanotix/kernel/∞ to find the kernel you wish to download, both 32bit and 64bit kernels can be found here. Copy the URL and replace the URL below with the one you want (as at the time of this writing ::+::, the "current-kernel" file does not exist, so you will need to specify the exact kernel you want),
cd /usr/src
wget http://debian.tu-bs.de/project/kanotix/kernel/kernel-kanotix-current.zip
then unzip the new kernel,
unzip kernel-kanotix-current.zip -d kernel-kanotix-current
cd kernel-kanotix-current
./install-kernel-kanotix.sh
if you need some modules install them with
Most will probably not need any additional driver modules at all. If you need a specific driver, replace *module*deb with the file name of the module you require.
Now restart the PC.
Upon boot, the new kernel is selected automatically.
Enter 3 as cheatcode and log in as root into the textconsole, there perform the following:
and save your settings with,
Now update Kano's scripts,
update-scripts-kanotix.sh
wait for the "finished message to be certain the update finished.
Nvidia
ATI Radeon
Once the installation is is complete, X should start up automatically, though if it doesn't you can test it with,
For good measure restart the machine,
Those who would now like to remove the old kernel completely can do so with a script from Kano. How it's done is described here: Old Kernel Cleaup∞
Löschungen:
Visit http://debian.tu-bs.de/project/kanotix/kernel/∞ to find the kernel you wish to download, both 32bit and 64bit kernels can be found here. Copy the URL and replace the URL below with the one you want (as at the time of this writing ::+::, the "current-kernel" file does not exist, so you will need to specify the exact kernel you want),
cd /usr/src
wget http://debian.tu-bs.de/project/kanotix/kernel/kernel-kanotix-current.zip
then unzip the new kernel,
unzip kernel-kanotix-current.zip -d kernel-kanotix-current
cd kernel-kanotix-current
./install-kernel-kanotix.sh
if you need some modules install them with
Most will probably not need any additional driver modules at all. If you need a specific driver, replace *module*deb with the file name of the module you require.
Now restart the PC.
Upon boot, the new kernel is selected automatically.
Enter 3 as cheatcode and log in as root into the textconsole, there perform the following:
and save your settings with,
Now update Kano's scripts,
update-scripts-kanotix.sh
wait for the "finished message to be certain the update finished.
Nvidia
ATI Radeon
Once the installation is is complete, X should start up automatically, though if it doesn't you can test it with,
For good measure restart the machine,
Those who would now like to remove the old kernel completely can do so with a script from Kano. How it's done is described here: Old Kernel Cleaup∞
Editiert am 2006-08-08 18:07:44 von Richard
Erweiterungen:
The current kernel with drivers can always to be found at http://kanotix.com/∞
Löschungen:
The current kernel with drivers can always to be found at http://kanotix.com/∞
Editiert am 2006-08-08 18:07:09 von Richard proofing
Erweiterungen:
These steps must be run as root
1. Download The Current Kernel
2. Install Kernel
Löschungen:
These steps must be run as root
1. Download The Current Kernel
2. Install Kernel
Editiert am 2006-08-08 18:02:22 von Richard
Erweiterungen:
These steps must be run as root
Löschungen:
These steps must be run as root
Editiert am 2006-08-08 18:00:04 von Richard proofing
Erweiterungen:
These steps must be run as root
Visit http://debian.tu-bs.de/project/kanotix/kernel/∞ to find the kernel you wish to download, both 32bit and 64bit kernels can be found here. Copy the URL and replace the URL below with the one you want (as at the time of this writing ::+::, the "current-kernel" file does not exist, so you will need to specify the exact kernel you want),
Those who would like can still add; echo $? to the script command. This displays the return code of the script, which is zero (0) if no error ocurred. Generally however, this is unnecessary.
:de: Kanotix-Kernel-Update∞
Löschungen:
hese steps must be run as root
Visit http://debian.tu-bs.de/project/kanotix/kernel/∞ to find the kernel you wish to download, both 32bit and 64bit kernels can be found here. Copy the URL and replace the url below with the one you want (as at the time of this writing ::+::, the "current-kernel" file does not exist, so you will need to specify the exact kernel you want),
Those who would like can still add ; echo $? to the script command. This displays the return code of the script, i.e. if it is not equal to zero, an error has happened. Generally however, this is unnecessary.
:de: Kanotix-Kernel-Update∞
Editiert am 2006-07-23 01:41:05 von IndieRockSteve minor fixes
Erweiterungen:
hese steps must be run as root
Those who would like can still add ; echo $? to the script command. This displays the return code of the script, i.e. if it is not equal to zero, an error has happened. Generally however, this is unnecessary.
To install the new kernel,
Attention: Since 2.6.12 several important driver packages (i.e. madwifi, wlan-ng, ndiswrapper) have been moved from the driver package, and can be found now directly in the kernel package!
Löschungen:
These steps must be run as root
Those who would like can still add ; echo $? to the script command. This displays the return code of the script, i.e. if it is not equal to zero, an error has happened. Generally however, this is unnecessary.
Attention: Since 2.6.12 several important driver packages (i.e. madwifi, wlan-ng, ndiswrapper) have been moved from the driver package, and can be found now directly in the kernel package!
Editiert am 2006-07-23 01:37:29 von IndieRockSteve minor fixes
Erweiterungen:
2. Install Kernel
3. Restart
4. Graphics Drivers
5. X
6. Restart
Löschungen:
1. Install Kernel
1. Restart
1. Graphics Drivers
1. X
1. Restart
Editiert am 2006-07-23 01:35:34 von IndieRockSteve some formatting fixes, a lot of grammar correction, and some updated information. A lot of the wacki
Erweiterungen:
Kanotix Kernel Updates
The current kernel with drivers can always to be found at http://kanotix.com/∞
These steps must be run as root
1. Download The Current Kernel
Visit http://debian.tu-bs.de/project/kanotix/kernel/∞ to find the kernel you wish to download, both 32bit and 64bit kernels can be found here. Copy the URL and replace the url below with the one you want (as at the time of this writing ::+::, the "current-kernel" file does not exist, so you will need to specify the exact kernel you want),
then unzip the new kernel,
1. Install Kernel
Those who would like can still add ; echo $? to the script command. This displays the return code of the script, i.e. if it is not equal to zero, an error has happened. Generally however, this is unnecessary.
Most will probably not need any additional driver modules at all. If you need a specific driver, replace *module*deb with the file name of the module you require.
Attention: Since 2.6.12 several important driver packages (i.e. madwifi, wlan-ng, ndiswrapper) have been moved from the driver package, and can be found now directly in the kernel package!
1. Restart
Now restart the PC.
Upon boot, the new kernel is selected automatically.
If during boot you notice a problem with the new kernel you can also select an older kernel.
Enter 3 as cheatcode and log in as root into the textconsole, there perform the following:
Adjust the settings of your soundcard,
and save your settings with,
Now update Kano's scripts,
wait for the "finished message to be certain the update finished.
1. Graphics Drivers
Nvidia
ATI Radeon
1. X
Once the installation is is complete, X should start up automatically, though if it doesn't you can test it with,
1. Restart
For good measure restart the machine,
Removal Of Old Kernel
Those who would now like to remove the old kernel completely can do so with a script from Kano. How it's done is described here: Old Kernel Cleaup∞
Löschungen:
Kanotix Kernel Updates
The current kernel with driver is always to be found at http://kanotix.com/∞
absolutely do this as root please !!!
download the current kernel:
for all standard 32bit-systems. (For 64bit or multi-prozessor systems - including some Intel processors using hyperthreading - you will find special kernels from Kano at the same location. e.g. http://debian.tu-bs.de/project/kanotix/kernel/kernel-kanotix64-current.zip∞ If you want to use them change the kernel name in all code examples here accordingly.)
then
then install it with the following commands.
>Those who would like can still add ; echo $? to the script command. That displays the return code of the >Script, i.e. if it is not equal to zero, an error has happened. Generally however, this is unnecessary.
Most will probably not need any additional driver modules at all. Feel free to delete unneeded drivers before executing the above otherwise you will install all of them. (Attention: Since 2.6.12 several important driver packages (i.e. madwifi, wlan-ng, ndiswrapper) have been moved from the driver package, and can be found now directly in the kernel package!)
Now start the PC again. The new kernel is selected automatically. (if there are problems, one can also select an older kernel here).
Enter 3 as cheatcode and log in as root into the textconsole, there perform the following:
adjust the settings of your soundcard, use :code:alsamixer:code: for that and save your settings with
Now update Kano's scripts.
whereupon you wait for the "finished" message, which concludes the action.
You can now install the driver for the graphic cards
for Nvidia start
or the graphic cards driver for the ATI Radeon start
If the installation is through, KDE will usually be started automatically again, otherwise enter the following command::
Restart, that's what should have happened !
Those who would now like to remove the old kernel completely can do so with a script from Kano. How it's done is described here: http://wiki.kanotix.net/CoMa.php?CoMa=Old-Kernel_cleanup∞
Editiert am 2006-07-23 01:00:02 von IndieRockSteve code cleanup
Erweiterungen:
cd /usr/src
wget http://debian.tu-bs.de/project/kanotix/kernel/kernel-kanotix-current.zip
unzip kernel-kanotix-current.zip -d kernel-kanotix-current
./install-kernel-kanotix.sh
adjust the settings of your soundcard, use :code:alsamixer:code: for that and save your settings with
update-scripts-kanotix.sh
Löschungen:
:code:cd /usr/src
wget :∞:
:code:unzip kernel-kanotix-current.zip -d kernel-kanotix-current:code:
:code:
./install-kernel-kanotix.sh:code:
:code:dpkg -i *modules*deb :code:
:code:update-modules:code:
adjust the settings of your soundcard, use :code:alsamixer:code: for that and save your settings with :code:alsactl store:code:
:code:update-scripts-kanotix.sh:code:
:code:install-nvidia-debian.sh:code:
:code:install-radeon-debian.sh:code:
:code:init 5:code:
älteste bekannte Version dieser Seite wurde bearbeitet am 2006-01-11 13:02:48 von AchIlles [ ]
Kanotix Kernel Updates
The current kernel with driver is always to be found at
http://kanotix.com/∞
absolutely do this as root please !!!
download the current kernel:
:code:cd /usr/src
wget
:∞:
for all standard 32bit-systems. (For 64bit or multi-prozessor systems - including some Intel processors using hyperthreading - you will find special kernels from Kano at the same location. e.g.
http://debian.tu-bs.de/project/kanotix/kernel/kernel-kanotix64-current.zip∞ If you want to use them change the kernel name in all code examples here accordingly.)
then
:code:unzip kernel-kanotix-current.zip -d kernel-kanotix-current:code:
then install it with the following commands.
>Those who would like can still add ; echo $? to the script command. That displays the return code of the >Script, i.e. if it is not equal to zero, an error has happened. Generally however, this is unnecessary.
:code:
cd kernel-kanotix-current
./install-kernel-kanotix.sh:code:
if you need some modules install them with
:code:dpkg -i *modules*deb :code:
Most will probably not need any additional driver modules at all. Feel free to delete unneeded drivers before executing the above otherwise you will install all of them. (Attention: Since 2.6.12 several important driver packages (i.e. madwifi, wlan-ng, ndiswrapper) have been moved from the driver package, and can be found now directly in the kernel package!)
Now start the PC again. The new kernel is selected automatically. (if there are problems, one can also select an older kernel here).
Enter
3 as cheatcode and log in as
root into the textconsole, there perform the following:
:code:update-modules:code:
adjust the settings of your soundcard, use :code:alsamixer:code: for that and save your settings with :code:alsactl store:code:
Now update Kano's scripts.
:code:update-scripts-kanotix.sh:code:
whereupon you wait for the "finished" message, which concludes the action.
You can now install the driver for the graphic cards
for Nvidia start
:code:install-nvidia-debian.sh:code:
or the graphic cards driver for the ATI Radeon start
:code:install-radeon-debian.sh:code:
If the installation is through, KDE will usually be started automatically again, otherwise enter the following command::
:code:init 5:code:
Restart, that's what should have happened !
Those who would now like to remove the old kernel completely can do so with a script from Kano. How it's done is described here:
http://wiki.kanotix.net/CoMa.php?CoMa=Old-Kernel_cleanup∞
:de:
Kanotix-Kernel-Update∞
Letzter Editor :
Eigentümer :